MERCEDES VITO W639 SERVICE INTERVAL DISPLAY RESET





Switch on ignition in position "2".
Wait for 5 to 10 seconds.
Press the system selection button repeatedly until provisional distance to next inspection appears in the display. (1)
Press reset key. (2)
The display shows: [Do you want to reset the maintenance interval? Confirmed by pressing the R button.]
Again briefly press the reset key. (2)
The display will show "Service interval reset".
Release reset button. (2)
Switch of ignition in position "0".
The service interval has now been reset.
The remaining distance or time has been exceeded too much if the service interval has not been reset.
Reset then only possible using an appropriate diagnostic unit.






 MERCEDES VITO W639 SERVICE INTERVAL DISPLAY RESET  


Switch on ignition in position "2".
Wait for 5 to 10 seconds.
Display shows the odometer.
If the odometer should not appear on display, proceed as follows:
Press system selector switch repeatedly until the mileage appears in the display. (arrow ) (5)
Repeatedly depress forward and back key(s) till scope of service appears in xxx km on the display (2)
Press and hold the reset button for approx. 30 seconds. (1)
A beep will sound.
Press the system selection button once. (5)
Press the forward/back button(s) until the mileage is shown in the display. (2)
Press reset key. (1)
The menu item "Durchzuführen" . appears in the display of the instrument cluster.   1 Reset key  2 , 3 Paging key 
4 , 5 System selection button  6 , 7 Volume control button(s) 
8 , 9 System selection button 

Repeatedly depress forward and back key(s) till menu for oil type selection appears on the display. (2)
Mark the specification of the engine oil used using the volume control buttons. (6)
Select highlighted oil specification using the forward and back key(s). (2)
Press and hold the reset button for approx. 3 seconds. (1)
Display shows SERVICE BESTÄTIGT
Repeatedly depress forward and back key(s) till the new service incident appears on the display.
The service interval has now been reset.
The remaining distance or time has been exceeded too much if the service interval has not been reset.
Reset then only possible using an appropriate diagnostic unit. 

Remark:

If wrong oil specification has been inadvertently selected, proceed as follows:
Press reset key. (1)
The menu item "Durchzuführen" . appears in the display of the instrument cluster.
Highlight menu option GESAMTSERVICE ZURÜCK using the keys for volume control. (6)
Select highlighted menu option using the forward and back key(s). (2)
Press and hold the reset button for approx. 3 seconds. (1)
Display shows SERVICE BESTÄTIGT
Press the upper Page forward/back button(s). (2)
The display will show the service incident to be corrected.
Press reset key. (1)
The menu item "Durchzuführen" . appears in the display of the instrument cluster.
Highlight menu option "Gesamtservice" in menu option "Durchzuführen" using the keys for volume control. (6)
Repeatedly depress forward and back key(s) till menu for oil type selection appears on the display. (2)
Mark the specification of the engine oil used using the volume control buttons. (6)
Select highlighted oil specification using the forward and back key(s). (2)
Press and hold the reset button for approx. 3 seconds. (1)
Display shows SERVICE BESTÄTIGT
Repeatedly depress forward and back key(s) till the new service incident appears on the display.
The service interval has now been reset.






                                    MERCEDES VITO W639 SERVICE INTERVAL DISPLAY RESET
                                     Service interval display reset - from vehicle chassis no. 291270


Switch on ignition in position "2".
Wait for 5 to 10 seconds.
Press and hold the reset button for approx. 30 seconds. (2)
A beep will sound.   1 Reset key  2 Reset key : M
Diesel engine with long oil-change interval :
Press reset button until display shows "rESEt.51" or "rESEt 229.5" on older models then showing an oilcan symbol too. (2)
Diesel engine with short oil-change interval :
Press reset button until display shows "rESEt.31" or "rESEt 229.3" on older models then showing an oilcan symbol too. (2)
Otto engine with long oil-change interval :
Press reset button until display shows "rESEt 229.5" together with an oilcan symbol.
Otto engine with short oil-change interval : Press reset button until display shows "rESEt 229.3" together with an oilcan symbol.
Continuation for all vehicles :
Press and hold the reset button for approx.3 seconds, then release and press again. (1)
The service interval has now been reset.
The remaining distance or time has been exceeded too much if the service interval has not been reset.
Reset then only possible using an appropriate diagnostic unit.







                                 Service interval display reset - up to vehicle chassis no. 291269


 
Switch on ignition in position "2".
Press the "M" button until RESTLAUFSTRECKE/RESTLAUFZEIT is shown in the display. (1)
Switch off the ignition within 10 seconds.
Press and hold the "M" button. (1)
Switch on ignition in position "2".
Keep on pressing the "M" key. (1)
The current remaining distance or the remaining time is displayed.
The new remaining distance will display after approx. 10 seconds and an acoustic signal sounds.
Release the "M" button. (1)
Switch of ignition in position "0".
The service interval has now been reset.
The remaining distance or time has been exceeded too much if the service interval has not been reset.
Reset then only possible using an appropriate diagnostic unit. 

 
Previous
Next Post »

Search This Blog

Translate

Popular Posts