Peugeot Service Box Installation Instructions:



         1st of all, if you have ALL READY Alcohol 120% & A.C.I.D. Wizard Plugin you are ready to start your Installation... (This you need it, because you need to "By-Pass" Secure Rom Protection...)

1. Run Alcohol 120% and then go to: Virtual Drive then, Numbers of Virtual Drives and select 1 Now Emulation and "Tick" ALL the boxes (3 of them) Now Extra Emulation and "Tick" ONLY "BAD Emulation" Finally click "OK"

2. Put in Alcohol 120% now, the 3 .iso DVD Images.

3. Click on "Start", Windows MAIN button and from Alcohol Folder run the A.C.I.D. Wizard.

4. "Tick" ALL the Boxes (IF not all ready...) and click "Cloak".

5. Minimize A.C.I.D. Wizard window.

6. NOW ATTENTIONN with this "Hint": Alt + Ctrl + Del and if "psaAgent.exe" RUNNING: KILL THIS!!!!! (This is running when you have already installed Lexia & PPS S/W's)

7. "Mount" now the 1st .iso DVD Image and IF the Setup did not start automatically "Explore" it via My Computer and run it from there and wait little bit...

8. Select your Language and click "OK".

9. In the Welcome screen click "Next".

10. In the screen (about customer terminal) choose "NO" and then "Next".

11. NOW IF YOU HAVE the "Magic" KeyGen use it and put your "Activation Code".

12. In the screen about applications "Tick" both Software’s and click "Next".

13. In the Sedre Welcome screen click "Next"

14. In the screen about accepting Terms ACCEPT those and click "Next"

15. In the screen about installation type choose "Standalone Installation" and click "Next"

16. In the screen about installation mode choose "Complete Installation" LEAVE AS IS the installation path and click "Install"

17. Now, wait to finish the setup Sedre installation and this, depend from your machine "Speed"... During Sedre installation, the setup it will ask about DVD 2/3 "Mount" via Alcohol 120% the 2nd .iso DVD Image and click "OK"

18. When the setup finished, click "Finished"

19. Now "Mount" via Alcohol 120% the 3rd .iso DVD Image and click "OK"

20. Now, from this screen and above you will make all the necessary steps about Service Documentation Backup... So, about installation type choose "Standalone Installation" and click "Next"

21. In the screen about installation mode choose "Complete Installation" LEAVE AS IS the installation path and click "Install"

22. Now, wait AGAIN to finish the setup Service Documentation Backup installation and this, depent AGAIN from your machine "Speed"... It will take a lot of time...

23. When the setup finished, click "Finished" & also click "Finished" in the Sedre installation setup from before... (Restore this from Taskbar)

24. Now "Un-Mount" the 3rd .iso DVD Image and then go to:
Virtual Drive then, Numbers of Virtual Drives and select 0
Now Emulation and "Un-Tick" Upper & Down ONLY boxes
Now Extra Emulation and "Un-Tick" "BAD Emulation" Finally click "OK"

25. From Taskbar click on A.C.I.D. Wizard icon and click "Uncloak" and then close A.C.I.D. Wizard

26. Close Alcohol 120%

27. Now copy - paste the "infos" file from Peugeot +20 Years Working folder in: C:\Program Files\DocBackupAP\Resources

28. Now you ARE READY to run Peugeot Sedre & Peugeot Service Documentation Backup!!! OPTIONAL, reboot your machine and when you log on in your Windows run from your Desktop the two Software’s...

 -----ATTENTION!!!!!-----

 when you are running Sedre you need to wait some time!!!!! DO NOT THINK that your system "Hanging"... 1 small icon in your Taskbar "Flashing" and one message about preparing appearing. When FINALLY your Internet Explorer open Sedre, click "YES" in the message about closing tab 
Previous
Next Post »

Search This Blog

Translate

Popular Posts